From 9:00 am to 5:00 pm
Shopping Cart

Ultrasonic Flaw Detector CTS-1002

Ultrasonic Flaw Detector CTS-1002

Ultrasonic Flaw Detector CTS-1002

  • Product Code : Flaw Detector
  • Availability : In Stock
  • $3,500.00

  • Price in reward points : 400

Available Options

Weighing only 0.9kg, square wave excitation, full WVGA resolution TFT display and strong flaw detecting capabilities make it superior when compared with other similar products.


Main Characteristics:

-Advanced circuitry, 640MHz sampling frequency and 800480 full WVGA resolution assure quick and accurate display and analysis on defect signals even when the signals are weak
-Using the advanced tunable square wave excitation technology, the CTS-1002 provides excellent penetration and high signal-to-noise ratio when detecting special composite materials, highly-attenuated or thick work-pieces
-4.3 inches display, set-in battery and charger, but only 0.9kg in weight which make it easy to operate and carry along
-The design meets the standard of IP54 certification and compatible with EN 12668:2000 standard
-With full WVGA TFT display at industrial level, this instrument offers fine images at different angles
-Optimized panel, user-friendly design for the menu, easy and fast to operate no matter you use the left hand or right hand. Various input modes, -English/Chinese menu optional
-Auto-calibration function including fast calibrating material velocity, probe delay and probe angle
-Zoom function for in-gate waveform enables users to observe the waveform detail conveniently. Zoom function for waveform display area and optimized height-to-width rate of the screen ensure echo with higher resolution
-DAC: Easy to make, correct, store and recall DAC
-Built-in intelligent lithium battery charger. Power supplied by battery or AC mains and it can automatically display the power supply modes. Auto switch between charge and work
-Long battery life of over 8 hours ensures your continuous work
-USB port for software updating, data transferring and printing and access to devises such as mouse, keyboard and U-disk


Specifications :

-Transmitter Pulse : -Ve Square Wave Pulse;
Transmitter Pulse Voltage : 25 ~ 250V, continuously adjustable with 25V increments
Pulse Width : Continuously adjustable from 50 to 800ns
Under 400/200V, pulse rise time<10ns, pulse fall time<10ns
-Test Modes : Pulse echo and dual transmission
-Damping : 400, 80 Ohm
-Frequency : Broadband / narrowband optional. Broadband: 0.5 ~ 20MHz. Narrowband: 1.5 ~ 3MHz
-Gain : 0.0~ 110.0dB. Steps as 0.1, 1.0, 2.0, 6.0
-Material Velocity : 1000 ~ 15000m/s continuously adjustable. Set-in 30 common material velocities selectable
-Test Range : 0.0~ 10000mm longitudinal wave at steel velocity. Range continuously variable with minimum 0.1mm increments
-Rectification : Positive halfwave, negative halfwave, full wave
-Alarm : Real-time alarm signal, positive and negative thresholds, minimum depth, DAC alarm optional
-Display : 4.3" industrial-leveled TFT color LCD with 800480 WVGA resolution
-Pulse Shift : -7.5 ~ 3000s
-Probe Zero : 0 ~ 999.9s
-Pulse Repetition Frequency (PRF) : 25 ~ 800Hz, auto adjustment mode
-Vertical Linearity Accuracy : 3
-Horizontal Linearity Accuracy : 0.4
-Surplus Sensitivity : 60dB (2002 flat bottom hole)
-Resolutions : 36dB
-Dynamic Range : 32dB
-Reject (suppression) : 0 ~ 90%
-Electric Noise Level : < 10%
-Q9 transducer cable connectors : USB HOST
-Power Supply : Large-capacity lithium battery without memory effect; Battery Life: More than 8 hours;
Built-in charger, AC Mains 220V
-Dust/Splash /Water-proof : meets IP54 standard
-Standards : EN12668-1 compliance Conform to JB/T 10061-1999 standard
-Environmental Temperature : -30 ~ 50
-Relative Humidity : 20% ~ 95%RH
-Weight : 0.9Kg (with battery and built-in charger)

Write a review

Note: HTML is not translated!
    Bad           Good